Understanding Mold

1/14/2022 (Permalink)

In as little as 48 hours, mold can quickly become a problem in your home or business when there's a water intrusion, like a roof leak or leaking water line. Mold can cause significant damage to your property. SERVPRO Franchise Professionals have the training, protective gear, and specialized equipment necessary to handle your mold problem. 

Mold Prevention Tips

• Fix leaky plumbing and leaks in the building envelope as soon as possible.
• Watch for condensation and wet spots. Fix sources of moisture problems as soon as possible.
• Prevent moisture due to condensation by increasing surface temperature or reducing the moisture level in the air. To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in the air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).
• Keep heating, ventilation, and air condition drip pans clean, flowing properly, and unobstructed.
• Vent moisture-generating appliances, such as washing machines or showers to the outside where possible.
• Maintain low indoor humidity, below 60% relative humidity (RH), ideally 30-50%, if possible, by providing adequate ventilation.
• Perform regular building/HVAC inspections and maintenance as scheduled.
• Clean and dry wet or damp spots within 48 hours.
• Don’t let foundations stay wet. Provide drainage and slope the ground away from the foundation.
• Use exhaust fans whenever cooking, dishwashing, and cleaning in food service areas.
• Inspect the building for signs of mold, moisture, leaks or spills:
  • Check for moldy odors.
  • Look for water stains or discoloration on the ceiling, walls, floors and windowsills.
  • Look around and under sinks for standing water, water stains or mold.
  • Inspect bathrooms for standing water, water stains or mold.
  • Do not let water stand in air conditioning or refrigerator drip pans.
• Clean mold off hard surfaces with water and detergent, and dry completely.
• Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
• Check the mechanical room and roof for unsanitary conditions, leaks or spills. v Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.

Ways to Keep Mold Out of the House

12/7/2021 (Permalink)

Mold. The very word is enough to make a person cringe.

Yes, mold can be good — it's essential in making brie and penicillin, for example, and necessary for the decomposition of organic matter in nature — but it can also be very, very bad, especially when it grows undetected in your home.

Mold spores spread easily and cannot be completely eradicated.

Mold can grow anywhere: on carpet, clothing, food, paper, and even in places you can't see, such as the backside of drywall, areas inside walls around leaking or condensing pipes, and above ceiling tiles.

So, what can you do if you're concerned about mold growing in your home?

The best approach is preventing mold before it becomes a problem. The key to mold prevention is simple: moisture control.

Here are ways to curb moisture indoors, and the mold that thrives on it.

1. Identify problem areas in your home and correct them. You can't mold-proof your home, but you can make it mold-resistant. Do an audit of your home: where are the problem areas? Does the basement flood? Do you notice frequent condensation on an upstairs window? Is there a water stain on the ceiling from a persistent leak? Preventing mold from growing or spreading might be as simple as ripping up carpet in a damp basement, installing mold-resistant products, or repairing damaged gutters. Or it may be a matter of major excavation and waterproofing. Whatever the case, address the problem now. It might cost some money up front, but it will surely be more costly down the road if mold continues to grow unchecked.

2. Dry wet areas immediately. Mold can't grow without moisture, so tackle wet areas right away. Seepage into the basement after a heavy rainfall, accumulation from a leaky pipe, even a spill on the carpet should be dried within 24 to 48 hours. If you've experienced a flood, remove water-damaged carpets, bedding, and furniture if they can't be completely dried. Even everyday occurrences need attention: don't leave wet items lying around the house, and make sure to dry the floor and walls after a shower. Don't leave wet clothes in the washing machine, where mold can spread quickly. Hang them to dry — preferably outside or in areas with good air circulation.

3. Prevent moisture with proper ventilation. It may be that your routine domestic activities are encouraging the growth of mold in your home. Make sure an activity as simple as cooking dinner, taking a shower, or doing a load of laundry doesn't invite mold by providing proper ventilation in your bathroom, kitchen, laundry room, and any other high-moisture area. Vent appliances that produce moisture — clothes dryers, stoves — to the outside (not the attic). Use AC units and dehumidifiers (especially in humid climates), but make sure they don’t produce moisture themselves by checking them periodically and cleaning them as directed by the manufacturer. Your energy-efficient home may be holding moisture inside, so open a window when cooking or washing dishes or showering or run an exhaust fan.

4. Equip your home with mold-resistant products. Building a new home or renovating an old one? Use mold-resistant products like mold-resistant drywall or mold-resistant Sheetrock, and mold inhibitors for paints. Traditional drywall is composed of a gypsum plaster core pressed between plies of paper. Mold-resistant drywall is paperless — the gypsum core is covered in fiberglass, making the surface highly water-resistant. Moisture-resistant drywall is especially valuable in areas prone to wetness, such as bathrooms, laundry rooms, basements, and kitchens. Not only is traditional drywall more susceptible to mold than the paperless kind, but it is also difficult to rid of mold, and removal and replacement can be expensive. Mold-resistant gypsum board is also available; the core of the drywall is developed in such a way to prevent moisture absorption, and thus prevent mold growth.

5. Monitor humidity indoors. The EPA recommends keeping indoor humidity between 30 and 60 percent. You can measure humidity with a moisture meter purchased from your local hardware store. You'll also be able to detect high humidity by simply paying attention to potential problem areas in your home. Telltale signs of excessive humidity include condensation on windows, pipes, and walls. If you notice condensation, dry the surface immediately and address the source of moisture (for example, turn off a humidifier if water appears on the inside of nearby windows).

6. Direct water away from your home. If the ground around your home isn't sufficiently sloped away from the foundation, water may collect there and seep into your crawlspace or basement.

7. Clean or repair roof gutters. A mold problem might be a simple matter of a roof that is leaking because of full or damaged gutters. Have your roof gutters cleaned regularly and inspected for damage, repair them as necessary and keep an eye out for water stains after storms that may indicate a leak.

8. Improve air flow in your home. According to the EPA, as temperatures drop, the air is able to hold less moisture. Without good air flow in your home, that excess moisture may appear on your walls, windows and floors. To increase circulation, open doors between rooms, move furniture away from walls, and open doors to closets that may be colder than the rooms they’re in. Let fresh air in to reduce moisture and keep mold at bay.

9. Keep mold off household plants. They're beautiful and help keep your indoor air clean — and mold loves them. The moist soil in indoor plants is a perfect breeding ground for mold, which may then spread to other areas of your house. Instead of getting rid of your plants, try adding a bit of Taheebo tea to the water you give to your houseplants. The oil of this tree, which withstands fungi even in rain forests, helps hinder mold growth in plant soil and can be found at natural food stores.

Finally, educate yourself on your region's climate — be it the cold and wet Northeast, the hot and wet South, the hot and dry Southwest, or the cold and dry West — and how it responds to moisture. There is no one-size-fits-all solution when it comes to mold prevention. Knowing what works for your climate and your home is an important first step.

Call our team of highly trained professionals at SERVPRO East Poway/Ramona for your mold remediation needs. 760-789-1086 

source: www.mnn.com 

Conditions That Might Be Right For Mold

11/18/2021 (Permalink)

It’s estimated that more than 1 million types of mold exist, yet less than 10 percent have actually been named. This means mold is very common in both indoor and outdoor environments. While mold and humans can sometimes co-exist without issue, there are certain species of mold that can cause health effects for some people.

If the right conditions exist, mold will grow.  Those conditions include:

• Water - Different mold types require varying amounts of liquid before growth begins.   
• Temperature - Normal indoor temperatures will promote mold growth.
• Time - Initial mold colonizers can take hold within one day after being exposed to an adequate water supply.

Mold growth can occur in any home, so it’s important to keep an eye out for situations that might promote mold activity. Roof/chimney leaks, wet basements, or condensation from ducts that dampen surrounding insulation are just a few examples of issues that make a house a prime target for mold growth.

If you suspect mold in your home, call SERVPRO of East Poway/Ramona to assess the situation. We have the knowledge, tools and track record to effectively remediate mold in your home or business.

If you suspect mold, call us today at (760)789-1086

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of East Poway/Ramona for mold remediation services.

Residents: Follow These Mold Safety Tips If You Suspect Mold

11/12/2021 (Permalink)

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of East Poway/Ramona for mold remediation services.

What Not to Do:

• Don’t touch or disturb the mold.
• Don’t blow air across any surfaces with visible or suspected mold growth.
• Don’t attempt to dry the area yourself.
• Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of East Poway/Ramona specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call Us Today – (760)789-1086

Does Your Home Have A Mold Problem?

12/23/2020 (Permalink)

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

It’s estimated that more than 1 million types of mold exist, yet less than 10 percent have actually been named. This means mold is very common in both indoor and outdoor environments. While mold and humans can sometimes co-exist without issue, there are certain species of mold that can cause health effects for some people.

If the right conditions exist, mold will grow.  Those conditions include:

• Water - Different mold types require varying amounts of liquid before growth begins.   
• Temperature - Normal indoor temperatures will promote mold growth.
• Time - Initial mold colonizers can take hold within one day after being exposed to an adequate water supply.

Mold growth can occur in any home, so it’s important to keep an eye out for situations that might promote mold activity. Roof/chimney leaks, wet basements, or condensation from ducts that dampen surrounding insulation are just a few examples of issues that make a house a prime target for mold growth.

If you suspect mold in your home, call SERVPRO of East Poway/Ramona to assess the situation. We have the knowledge, tools and track record to effectively remediate mold in your home or business.

If you suspect mold, call us today at (760)789-1086

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of East Poway/Ramona for mold remediation services.

If You See Signs of Mold, Call Us Today –(760)789-1086